Alcohol Dilution Calculator

BrewCo Brew Tools

Need to bring a spirit, liqueur base or infusion down to a set strength? Enter what you have and the strength you want, and this calculator tells you exactly how much water to add.

How to use it

  1. Choose whether you're starting from a known volume, or aiming for a final volume.
  2. Enter the current strength (ABV %) from the label or your alcoholmeter reading.
  3. Enter the strength you want. The water to add updates as you type.
— ml water
Fill in all three fields above

How the dilution sum works

The amount of alcohol stays the same when you add water. Only the volume changes. So current strength × current volume = new strength × new volume. Rearranged, the new volume is the current volume × current strength ÷ the strength you want, and the water to add is the difference.

Worked example: you have 700ml at 40% and want 25% for a fruit liqueur base. 700 × 40 ÷ 25 = 1,120ml, so add 420ml of water.

Tips for accurate results

  • Add the water slowly. Alcohol and water shrink slightly when mixed, so the final volume comes out a little under the sum. The strength is still very close.
  • Check with an alcoholmeter at 20°C. A spirit hydrometer (alcoholmeter) reads the strength directly. A normal beer or wine hydrometer doesn't.
  • Use clean, still water. Bottled still water or cooled boiled water stops cloudiness and off flavours.
  • For beer wort or wine must, use our wort and must dilution calculator, which works in gravity rather than ABV.

In the UK you can buy spirit and dilute or flavour it at home freely. Distilling alcohol at home needs a licence from HMRC.

More free home brew calculators

Making liqueurs or flavoured spirits? See our Still Spirits flavourings and gin making kits and botanicals.

Frequently Asked Questions
How much water do I add to reduce 40% alcohol to 20%?
Add the same volume of water as you have spirit. Halving the strength doubles the volume, so 500ml at 40% plus 500ml of water gives about 1 litre at 20%.
Why is my final volume a little less than expected?
Alcohol and water molecules pack together when mixed, so the mix shrinks by a few percent. The strength is still very close to the calculated figure.
Can I use this for wine or beer?
Yes for ABV, but for adjusting a wort or must before fermenting, use the gravity-based wort and must dilution calculator instead.
How do I check the strength after diluting?
Use an alcoholmeter (spirit hydrometer) at about 20 degrees C. It reads alcohol by volume directly in spirits and liqueur bases without sugar.