Sugar to Alcohol Calculator

BrewCo Brew Tools

How much stronger will your wine, cider or mead be if you add sugar? Or how much sugar do you need to hit a set strength? Enter your batch and this calculator works it out.

How to use it

  1. Enter your batch size and its starting gravity. Use 1.000 for plain water, or your hydrometer reading for juice.
  2. Choose your sugar: table sugar, brewing sugar (dextrose) or honey.
  3. Enter either the sugar you'll add or the strength you want. The result updates as you type.
Apple juice is usually about 1.045-1.050, red grape juice about 1.055-1.070, water 1.000.
—
Fill in the fields above
–New starting gravity
–ABV from the sugar
–Total ABV

The quick rule

About 100g of table sugar per gallon (4.5 litres) adds roughly 1% ABV, once it's fully fermented. For a 23 litre batch, that's about 500g for each extra 1%.

Sugar Gravity points per kg in 1 litre For 1% more in 4.5 litres
Table sugar (sucrose) about 384 about 90-100g
Brewing sugar (dextrose) about 350 about 100g
Honey about 292 about 115-120g

Getting the strength you want

  • Measure first. Fruit juice already has sugar, so take a hydrometer reading before adding any.
  • Dissolve it properly. Stir the sugar into some warm juice or water first so it doesn't sit on the bottom.
  • Going strong? Add the sugar in stages instead of all at once. See our step feeding guide.
  • Beer kits are different. Follow the kit's own sugar amount, because extra sugar thins the body.

More free home brew calculators

See our brewing sugars, wine and cider yeasts, and the hydrometer to measure it all.

Frequently Asked Questions
How much sugar does it take to raise ABV by 1%?
About 100g of table sugar per gallon (4.5 litres), or about 500g in a 23 litre batch, once fully fermented.
How much sugar do I add to make cider stronger?
Apple juice usually starts around 1.045-1.050, about 6%. Each extra 100g of sugar per 4.5 litres adds roughly 1% more.
Is brewing sugar the same as table sugar?
Brewing sugar is usually dextrose. It ferments cleanly but gives a little less alcohol per gram than table sugar, about 10% less.
Can I add sugar after fermentation has started?
Yes. Dissolve it in a little of the brew and stir it in gently. Adding sugar in stages helps strong wines and meads finish cleanly.